PanelMate Accessories
Installation Manual
1. Runtime Operation User's Guide PanelMate PC
This manual describes the PanelMate PC runtime operation.
100339.PDF | PDF - 389 KB
2. PanelMate Power Series Power Pro, Pro LT Installation Guide
With more than 100,000 PanelMate units currently in operation since its introduction in 1986, Cutler-Hammer has helped many users troubleshoot their PanelMate installations. This Installation Guide is intended to help you avoid the common mistakes made by first-time PanelMate users.
100436.PDF | PDF - 1231 KB
3. Demonstration Power Supply
The Demonstration Power Supply is designed for short-term operation of 24VCD PanelMate products. The Demonstration Power Supply is not suitable for permanent installation and will not support continuous operation of a PanelMate unit.
150121.PDF | PDF - 68 KB
4. PanelMate Configuration Storage Module
The Configuration Storage Module (CSM) is a hardware option for the PanelMate Power Series. The CSM can be used to transfer configurations from one PanelMate Power Series unit to another as well as to and from a personal computer in which PanelMate Transfer Utility software has been installed.
150321.PDF | PDF - 324 KB
5. Product Data Sheet
Introduction The AcceleratI/On interface is a separate module which is compatible with the Operator Station. The AcceleratI/On interface may be installed in an Operator Station to provide communication to Allen-Bradley PLCs through Data Highway, Data Highway Plus, or the remote I/O network. This option is shipped with the AcceleratI/On interface, four screws, a disposable grounding wrist strap, a 6-terminal removable connector, and this instruction sheet.
150334.PDF | PDF - 99 KB
6. AC to DC Power Supplies - Instructions
This data sheet contains the instructions and specifications for three AC to DC power supplies-115 VAC to 24 VDC Converter, 115/220 VAC to 24 VDC Converter (30 Watt), and 115/220 VAC to 24 VDC Converter (15 Watt).
150337.PDF | PDF - 87 KB
7. PanelMate Power Series Product Data
This document describes the installation of a cooling fan in the Cutler-Hammer 9” monitor.
150343.PDF | PDF - 54 KB
8. Software Only Capacity Expansion Kit
The standard Capacity Expansion Kit is a hardware option for the PanelMate Power Series. The Software Only Capacity Expansion Kit lets you access higher numbered pages (0 to 99) vs the Standard 15 pages. The actual physical memory is not required!
150374.PDF | PDF - 6 KB
9. Installation Instructions for Micro PanelMate D830, D840 and D850 Communications Enable Utility with DH-485
The communications enable utility disk allows the Micro PanelMate unit to accept all communications interfaces.
150377.PDF | PDF - 10 KB  | IL015037700.PDF
10. Instructions for Use and Care of the Operator Interface Touchscreen
The Operator Interface is an industrial hardened unit, built to withstand tough environments. Proper use and maintenance of the Operator Interface will ensure a trouble-free system well beyond the warranty period.
150386.PDF | PDF - 110 KB
 

11. Instructions for Installing an Adapter Mounting Kit
This kit is an accessory to the PanelMate 1500/1700 product lines. It allows the user to adapt an existing PanelMate 2600/2700 TouchScreen panel cutout to accept a PanelMate 1500/1700 TouchScreen unit. This kit contains an adapter plate, gasket, mounting hardware, and a cutout/torque drawing.
150404.PDF | PDF - 77 KB
12. Instructions for Installing an Adapter Mounting Kit
This kit is an accessory to the PanelMate 1500/1700 product lines. It allows the user to adapt an existing PanelMate 2600/2700 TouchPanel panel cutout to accept a PanelMate 1500/1700 TouchPanel unit. This kit contains an adapter plate, gasket, mounting hardware, and a cutout/torque drawing.
150405.PDF | PDF - 77 KB
13. Installation Instructions for PanelMate Adapter Mounting Kit 1524TP
This adapter kit is for retrofit of PanelMate 1500/1700 touch panel units into existing PanelMate 2400 touch panel installation.
150406_MRA01988.PDF | PDF - 77 KB  | IL015040601
14. Installation Instructions - Adapter Mounting Kit For Retrofit of PanelMate 1500/1700 TouchPanel Units into Existing PanelMate 2400 TouchPanel
This kit is an accessory to the PanelMate 1500/1700 product lines. It allows the user to adapt an existing PanelMate 2400 TouchPanel anel cutout to accept a PanelMate 1500/1700 TouchPanel unit. This kit contains an adapter plate, gasket, mounting hardware, and a cutout/torque drawing.
150406.PDF | PDF - 77 KB
15. Installation Instructions for the Data Highway/Data Highway Plus Communication Card (ISA)
The Data Highway/Data Highway Plus Communication Card is an interface card that makes it possible for a configuration running on a host computer to communicate with Allen-Bradley programmable controllers over Data Highway and Data Highway Plus. The D700 series, PMPC-RT, PMPC-72, and PMPC-73 can all be configured to use the Data Highway/Data Highway Plus Communication Card.
150414.PDF | PDF - 315 KB
16. Instructions for Use and Care Of the Operator Interface Touchscreen
The Operator Interface is an industrial hardened unit, built to withstand tough environments. Proper use and maintenance will ensure a trouble-free system well beyond the warranty period.
150415.PDF | PDF - 72 KB
17. Installation Instructions for the SRAM PC104 Battery Backed Memory Card
DESCRIPTION The SRAM PC104 Battery Backed Memory Card is a device that can emulate a floppy disk drive or expand RAM capacity. Two versions are available. You can install up to two SRAM PC104 Battery Backed Memory Cards in one PC.
150419.PDF | PDF - 153 KB
18. Instructions for Installing a Profibus DP Slave Adapter in a 24 VDC PanelMate Power Series
The Profibus DP Slave Adapter is a product option that provides communications between a 24 VDC PanelMate Power Series unit and a Profibus network. Using the Profibus DP Slave Adapter, the unit can connect directly to Profibus networks without requiring any additional communications modules.
150422.PDF | PDF - 85 KB
19. Instructions for Installing a Profibus DP Slave Adapter in a PanelMate Power Series
The Profibus DP Slave Adapter is a product option that provides communications between a PanelMate Power Series unit and a Profibus network. Using the Profibus DP Slave Adapter, the unit can connect directly to Profibus networks without requiring any communications modules.
150423.PDF | PDF - 229 KB
20. PanelMate Power Series Modbus Plus Interface Board Installation
Instructions for installing a Modbus Plus Communications Interface Board (Cat # 0748-1, 0748-2) in a PanelMate Power Series unit. The Modbus Plus Communication Interface allows the PanelMate unit to communicate on a Modbus Plus network.
150463.PDF | PDF - 230 KB

21. PanelMater Power Series Hardware Installation for All 120/230VAC Models
This document contains installation, operation and maintenance information for all 120/230VAC PanelMate Power Series units. This document is intended for system engineers, plant engineers, and plant and plant maintenance personnel.
150479.PDF | PDF - 643 KB
22. PanelMate Power Series Adapter Mounting Kit - Instructions
Installation instructions for the Adapter Mounting Kit which allows mounting a PanelMate Power Series 1700 TouchScreen unit in a location previously occupied by either a PanelMate Power Series 2000 (model 24xx) TouchPanel or PanelMate Power Series Compact TouchPanel unit.
150485.PDF | PDF - 80 KB
23. PanelMate Power Series Adapter Mounting Kit - Instructions
Installation instructions for the Adapter Mounting Kit which permits mounting a PanelMate Power Series 1700 TouchScreen unit in a location previously occupied by a PanelMate Power Series 2000 (model 26xx/27xx) TouchPanel unit.
150486.PDF | PDF - 78 KB
24. PanelMate Power Pro Adapter Mounting Kit - Instructions
Installation instructions for the Adapter Mounting Kit which permits mounting a PanelMate Power Pro 1700 TouchPanel unit in a location previously occupied by a PanelMate Power Series 2000 (model 24xx) TouchPanel unit. The Adapter Collar is approved for use in Type 12 installations when properly mounted in a correspondingly rated enclosure.
150487.PDF | PDF - 80 KB
25. PanelMate DeviceNet Interface Installation
The PanelMate DeviceNet Interface is an accessory for 24VDC PanelMate Power Pro, Power Series and PanelMate 500 operator interface units. DeviceNet is a low level network protocol that provides connections between simple industrial devices and higher level devices such as a PLC.
150507.PDF | PDF - 185 KB
26. PanelMate Power Pro Modbus Plus Interface Module Installation
Instructions for installing a Modbus Plus Communications Interface Module (Cat # 1248) on a PanelMate Power Pro unit. The Modbus Plus Communication Interface allows the PanelMate unit to communicate on a Modbus Plus network.
150510.PDF | PDF - 151 KB
27. Installation Instructions for the PanelMate Power Pro Screen Overlay Kit
A screen overlay provides a protective barrier between your PanelMate screen and its environment. Cutler-Hammer offers two types of overlays. Clear Protective overlays are transparent while Anti-Glare overlays provide a diffusion layer that reduces screen glare.
150527.PDF | PDF - 89 KB
28. Instructions for Installing a SRAM PC104 Battery Backed Memory Card
The SRAM PC104 BBMC is a device that can emulate a floppy disk drive or expand RAM capacity. Two versions are available. One version requires an ISA adapter in order to fit into a standard PC ISA slot. The second version can be connected to the CPU card using an ISA CPU adapter card.
150544.PDF | PDF - 112 KB
29. Micro PanelMate Communication Cabling - Instructions
Instructions for Micro PanelMate cable configurations. Includes standard part numbers and cable pin-outs corresponding RS-232/422/485 standard.
AD04804007E.PDF | PDF - 56 KB
30. Installation Instructions - Adapter Mounting Kit 1524TP
Installation instructions for retrofit of PanelMate 1500 or 1700 TouchPanel Units into existing PanelMate 2400 TouchPanel mounting.
AP04805001E.PDF | PDF - 88 KB

 

 
31. Option 1219A - AC to DC Power Supply
Eaton's Cutler-Hammer Option 1219A - AC to DC power supply is designed for permanent installations of Cutler-Hammer operator stations equipped with 24VDC electronic modules.
IL015047400.PDF | PDF - 440 KB  | IL015047400.PDF
32. PanelMate ePro PS PCI Adapter - Instructions
Instructions for installing the PCI adapter on a PanelMate ePro PS 12", 15", and Blind Node models.
IL04805001E.PDF | PDF - 210 KB
33. Screen Overlay Kit - Instructions
A screen overlay provides a protective barrier between your PanelMate display screen and the environment.
IL04805002E.PDF | PDF - 80 KB  | 01-50608-00
34. Adapter Plate Kit - APPS12A - Instructions
Installation instructions for replacing a PanelMate® 4000/5000 TouchPanel unit with a PanelMate® ePro PS 12” Display unit using the adapter plate kit.
IL04805004E.PDF | PDF - 47 KB  | 01-50610-00
35. Adapter Plate Kit - APFP15A - Instructions
Installation instructions for replacing a PanelMate 4000/5000 TouchPanel unit with a Cutler-Hammer 7585DT-15, Flat Panel 15” Display, using the adapter plate kit.
IL04805005E.PDF | PDF - 47 KB  | 01-50611-00
36. PanelMate ePro PS Restore Kit - Instructions
Installation Instructions for restoring a PanelMate ePro PS or PS Classic back to the factory installed image using a 76MLPS Series (76MLPSD, 76MLPSB, 76MLPSCD, and 76MLPSCB) Restore Kit.
IL04805006E.PDF | PDF - 1048 KB  | 01-50609-00
37. PanelMate Option 1219B - AC to DC Power Supply
Hardware installation instructions for the Option 1219B - AC to DC power supply including mounting, power requirements, connectivity information and environmental specifications. The power supply is designed for permanent installations of Cutler-Hammer PanelMate operator stations requiring 24VDC power input.
PU04805002E.PDF | PDF - 583 KB  | 01-50568-00